swiss made skateboards since 1998
Standard Trucks - VT100
Very solid and turny trucks for slalomboards, flex decks and little cruisers such as the Tree Hugger.
width: 100mm (4")
bushings: 90A (soft and responsive)
color ways: silver/black and black/polish
Standard Trucks - VT125
Very solid and turny trucks for slalomboards, flex decks and longboards.
width: 125mm (5")
bushings: 90A (soft and responsive)
color ways: silver/black and black/polish
Standard Trucks - VT150
Very solid and turny trucks for slalomboards, flex decks and longboards.
width: 150mm (6")
bushings: 90A (soft and responsive)
color ways: silver/black and black/polish
Inverse Trucks - IT150
The ultimate carving trucks for slalomboards, cruisers and longboards. Very stable when going fast, yet very turny. Heavy duty die cast aluminum.
width: 150mm (6")
bushings: 90A (soft and responsive)
color ways: silver/black
Inverse Trucks - IT180
The ultimate carving trucks for slalomboards, cruisers and longboards. Very stable when going fast, yet very turny. Heavy duty die cast aluminum.
width: 180mm (7")
bushings: 90A (soft and responsive)
color ways: silver/black
Diamond Trucks - DT180
Very solid, yet very turny downhill and carving trucks that perfectly fits on all longboards and cruisers.
Heavy duty die cast aluminum.
width: 180mm (7")
bushings: 90A (soft and responsive)
color ways: black/silver
Cutback Truck Set - CB150
Turn your skateboard into a surfboard! With these trucks you will feel like you are surfing as they allow cutback-like manoeuvres on the streets.
width: 150mm (6")
color ways: Silver/black
available as Cutback front truck only or as set with Inverse 150 rear truck
Standard Wheels - VW65
The standard series is made for the daily use and suits pretty much every skateboarder on this planet. They are of stunning quality at a reasonable price.
The VW 65 are perfect for skateboards and crusiers up to 90 cm of length.
specs: 65mm 78A / core on the side
6 colors available:
red, blue, green, yellow, white and black
Standard Wheels - VW70
The standard series is made for the daily use and suits pretty much every skateboarder on this planet. They are of stunning quality at a reasonable price.
The VW 65 are perfect for skateboards and crusiers up to 90 cm of length.
specs: 65mm 78A / core on the side
6 colors available:
red, blue, green, yellow, white and black
Standard Wheels - VW76
The standard series is made for the daily use and suits pretty much every skateboarder on this planet. They are of stunning quality at a reasonable price.
The VW 76 are perfect for longboards and crusiers up to 120 cm of length.
specs: 76mm 78A / centered core
3 colors available:
transparent blue, red and black
Speed Series - VeeDub 69
The VeeDub 69 is a very fast wheel for the daily use but also for cone racing or other speed competitions. Use softer wheels (78A) if you want more grip for carving and harder wheels (83A) for more speed and sliding.
dimensions and colors:
- 69mm 78A / centered core / acid green
- 69mm 80A / centered core / acid blue
- 69mm 83A / centered core / acid orange
Speed Series - VeeDub 72
The VeeDub 72 is a very fast wheel for the daily use but also for downhill racing or other speed competitions. Use softer wheels (78A) if you want more grip for carving and harder wheels (83A) for more speed and sliding.
dimensions and colors:
- 72mm 78A / centered core / acid green
- 72mm 80A / centered core / acid blue
- 72mm 83A / centered core / acid orange
Speed Series - VeeDub 76
The VeeDub 76 is a very fast wheel for the daily use but also for downhill racing or other speed competitions.
It is designed for longer skateboards - 90 cm and more - and available in the hardness 80A which is a good combination of speed and grip.
dimensions and colors:
- 76mm 80A / centered core / acid blue
Speed Series - HiFly 83
The HiFly 83 is a very fast wheel for the daily use but also for downhill racing or other speed competitions.
It is designed for longer skateboards - 90 cm and more - and available in the hardness 80A which is a good combination of speed and grip.
dimensions and colors:
- 83mm 80A / centered core / acid blue
Viking Speed Bearings
For the Viking Bearings we focus on quality and durability as well as performance. The range contains bearings for the daily use but also for high performance racing.
available bearings:
- ABEC 5 / blue
- ABEC 7 / red
- ABEC 9 / gold
- Ceramics Speed Bearings / red
Viking Riser Pads
Viking riser pads are made from hard rubber and are used to lift up the trucks in order to avoid wheel bite and as shock absorbers.
3mm flat Rubber Pad
for Inverse, Diamond and Cutback Trucks
12mm flat Riser Pad
Ideal for all trucks
12° 3/18mm Wedge Riser Pad
strongly angled riser pad to make trucks more turny
7° 7/12mm Wedge Riser Pad
standard wedge for slalom and cruiser trucks
Viking Grip Tape
Our heavy duty grip tape comes in a wide variaty of colors and can be used for all kinds of skateboards or other surfaces (stairs, steps, car or boat decks,...)
dimensions and colors:
- 9' x 18m (Roll) or sheets of 1m
- black is also available in 10' width
black, blue, red, green, light blue, clear, neon yellow, neon green, neon pink, camouflage, black-yellow stripes, red-white stripes, neon orange
Viking Fly By Hooks
The Viking Fly-By-Hooks are made of a reinforced nylon plastic. They are strong and do not dammage your shoes. They can be mounted straight or in an angle on any slalomboard, skateboard, or cruiser. You can use a hot air gun to bend them up if necessary.
They come as a pair and with 4 screws included.
Viking T-Tool
Multi functional tool for all types of screws and nuts that appear on skateboards.
Fits to those 'non-ISO' norm screws that we're usually not so used to, here in Europe...
The T part of the tool contains drivers for Axl-, Kin Pin-, and mounting nuts.
The small L part can be pulled out of the T part and has an allenhead driver on one end and a phillips screw driver on the other.
Viking Hard Ware
- Spacers 10mm
For all common skateboard weels
- UNF Screws and Nuts
To mount the trucks on the skateboard
lengths: 25mm / 30mm / 35mm / 40mm with allenhead
- King Pin with Washers
For all common skateboard trucks
- Axle Nuts
For all common skateboard trucks
- Bushings
In different hardnesses - 85A / 90A / 95A
For conventional trucks or trucks with reversed kingpin
- Pivot Bushings
For all common skateboard trucks
Solarez Shoe Repair
Tough synthetic rubber that sticks to any surface. It dries to a clear polymer as a protective coating. Use it to fix your shoes, coat high-wear areas, seal out the elements. Solarez Shoe Repair will "ski-over" in 10-15 minutes and dries in about 2 hours. Nevertheless, a complete cure takes 24 hours especially when filling deep gouges.
Use in a well ventilated area.
Surfaces should be clean and dry before applying.
Viking Skateboard Racks
Tough synthetic rubber that sticks to any surface. It dries to a clear polymer as a protective coating. Use it to fix your shoes, coat high-wear areas, seal out the elements. Solarez Shoe Repair will "ski-over" in 10-15 minutes and dries in about 2 hours. Nevertheless, a complete cure takes 24 hours especially when filling deep gouges.
Use in a well ventilated area.
Surfaces should be clean and dry before applying.